EasyFil HIPS is a high-performance and easy to print High Impact PolyStyrene type of 3D printer filament, which is slightly softer and more flexible than average HIPS filaments and by that making it a very impact resistant HIPS filament.
Achtung: Letzte verfügbare Teile!
Very limited warping
High impact resistance
Extremely smooth matte surface finish
Light-weight and durable
High ESCR resistance
Engineered to meet UL 94HB flame retardancy standards
Easily to glue with various adhesives
HIPS styrene glues, epoxy based adhesives, superglues, and contact adhesives
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 104%|
|Print temp: ± 220 - 260° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 90 - 110° C||Fan speed: 0-25%||Experience level: Intermediate|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.04 g/cc||50 gr coil||0.75 Kg spool|
|Ø 1.75mm||± 20.0m||± 300m|
|Ø 2.85mm||± 7.5m||± 113m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.