Atlas Support is the next generation in PVA water-soluble support materials for FFF/FDM 3D printing. Atlas Support is the result of extensive research to PVA improvement which has resulted in an unique formulation where numerous PVA grades have been blended into one superior water soluble support material with improved thermal stability.
Warning: Last items in stock!
Excellent water solubility
Excellent support material for complex dual extrusion prints!
Improved thermal stability
Much lesser risk of clogged nozzles caused by deteriorating/crystalizing material in (too) hot nozzle
Good bonding to various (thermo)plastics
Biodegradable once dissolved in water
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100%|
|Print temp: ± 180 - 205° C *||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 - 60° C||Fan speed: 0-25%||Experience level: Expert|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
*) Do not exceed a printing temperature of 225˚C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.
|ρ: 1.22 g/cc||50 gr coil||0.3 Kg spool|
|Ø 1.75mm||± 17.0m||± 102m|
|Ø 2.85mm||± 6.4m||± 39m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
|Filament Net Weight:||± 0.3 Kg|
|Diameter Tolerance:||± 0.05 mm|
|Print Temperature Guideline:||180 - 205°C|
|Glass Transition Temperature:||-|
|Ovalidity Tolerance (max):||± 5%|
|Print Speed Guideline:||-|