Crystal Flex is a high-performance and easy to use Styrene-Butadiene Copolymer based 3D printer filament, which combines strength, resilience, semi-flexibility and transparency with printability.
Warning: Last items in stock!
Very clear filament with 92% light transmittance and extremely high surface gloss
Semi-flexible, bendable and resilient
Shore hardness of 63D and bendable up to 230% without causing white stress marks
Very easy to print
Practically no warping due to extremely low water-absorption properties
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several heated print surfaces
Engineered to meet UL 94HB flame retardancy standards
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100%|
|Print temp: ± 230 - 260° C||Print speed: High||Retraction: Yes ± 5mm|
|Heat bed: ± 80 - 100° C||Fan speed: 0-25%||Experience level: Beginner / Intermediate|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 101 g/cc||50 gr coil||0.5 Kg spool|
|Ø 1.75mm||± 20.6m||± 206m|
|Ø 2.85mm||± 7.8m||± 78m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.