ReForm is a sustainable initiative within Formfutura to efficiently manage residual extrusion waste streams and re-use them into high-end upcycled filaments. The ideology behind ReForm is to a make 3D printing more sustainable – without having to make compromises on material properties – and yet keep it affordable.
Warning: Last items in stock!
100% upcycled/recycled filament with retaining the unique easy-to-print characteristics of EasyFil PLA
Less environmental impact by quality controlling and re-using extrusion waste streams
Only residual waste streams of EasyFil PLA is being re-used, thus pure quality!
ReForm filaments are spooled on easy to recycle and dispose recycled cardboard spools
ReForm filament is packaged in recycled carton boxes
Very easy to print
Warp-free printing and no deformation after cooling
Improved flowing behaviour and inter-layer adhesion
Good first layer adhesion to several (un)heated print surfaces
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 100%|
|Print temp: ± 180 - 220° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 0 - 60° C||Fan speed: 50-100%||Experience level: Beginner|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.24 g/cc||50 gr coil||1 Kg spool|
|Ø 1.75mm||± 16.8m||± 335m|
|Ø 2.85mm||± 6.3m||± 126m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.
|Colour:||Off Black (RAL ±8022)|
|Filament Net Weight:||± 1 Kg|
|Diameter Tolerance:||± 0.05 mm|
|Print Temperature Guideline:||± 180 - 220° C|
|Heatbed Temperature:||± 0 - 60°C|
|Melting Temperature:||± 210 ± 10° C|
|Glass Transition Temperature:||± 60° C|
|Ovalidity Tolerance (max):||± 5%|
|Density (21.5°C):||1240 kg/m³|
|Print Speed Guideline:||Medium|
|Impact Strength:||7.5 KJ/m²|
|Tensile Modulus:||3310 Mpa (MD)|
|Yield Strength:||110 Mpa (MD)|