Our Ocean Blue™ PLA filament will remind you of those beautiful, refreshing and blue-watered oceans you see on tropical holiday postcards. With this semi-transparent blue coloured filament you can get that tropical oceanic experience in your living room.
The last one!
Warning: Last items in stock!
It doesn't matter which desktop 3D printer you have, as 3D Printing will always go smoothly with Formfutura filament. Our Premium 3mm PLA filament prints perfectly with all common desktop 3D printers. Amongst others:
PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar beet. By being derived from biological resources this type of thermoplastic can be biodegradable under the right conditions (such as an active compost heap, with enough presence of oxygen) and therefore has a much lesser environmental impact than thermoplastics derived from fossil fuels.
Our Premium PLA 3D printer filament is wrapped on a reusable plastic spool which contains approximately 1Kg of filament. Our spool-wrapped Premium PLA filaments are packed in a silica sealed bag and come in a cardboard box. Please see below for more details with respect to the weight and packaging of our spool-wrapped Premium PLA 3D printer filaments:
|Filament Net Weight:||± 1 Kg|
|Spool Size (D x h):||195 mm x 85 mm|
|Spool Hub Diameter:||38 mm|
|Carton Box Size (L x W x H):||205 mm x 205 mm x 90 mm|
|Packaged weight||1.45 Kg|
|Diameter Tolerance:||+0.10 / -0.15 mm|
|Ovalidity Tolerance (max):||± 5%|
|Density (21.5°C):||1250 kg/m³|
|Melting Temperature:||~180°C to 200°C|
|Print Temperature Guideline:||~180°C to 200°C|
|Print Speed Guideline:||-|
|Glass Transition Temperature:||~ 50° C|
|Impact Strength:||5 KJ/m2|
The printing temperature guideline for printing with our Premium PLA filament is approximately 180°C to 200°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height.
PLA has much less tendency to warp compared to ABS. Therefore it can be printed both with and without a heated print bed. However, if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 40° to 50° C.
A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. There are several tricks to get the first layer of your PLA print to stick better to the print bed of your 3D printer.
Blue masking tape is unlikely to leave a residue on your print bed. A hairspray coating however will leave a residue on your print bed.