Europe's Leading 3D-Printing Store in High Quality FormFutura 3D Printing Filaments & Pellets . All for Professionals, Artists & Hobbyists

Thibra3D SKULPT - Original

New product

SKULPT is a unique sculptable 3D printer filament materialized by Thibra3D, which allows one to post process SKULPT 3D printed objects similar to sculpting clay. 

More details

€ 44,95 tax incl.

  • 1.75mm
  • 2.85mm
  • 750 gram
  • 50 gram (Sample Coil)

More info

By projecting a temperature of ± 70° C on the SKULP 3D printed object it will be possible to tweak and finetune the 3D printed object by sculpting it or remodelling it slightly.

Visible 3D printed layers and imperfections caused by blobs, zits, zippers and removed support structureson the SKULP 3D printed object can very easily be remodelled into a perfect smooth service and even detailed accents can be sculpted into the surface of the SKULPT 3D printed object.

 

Unique features

  •         Sculptable by applying heat

o   Use a heat gun to project a temperature of ± 70°C to the part of the SKULPT 3D printed object which requires finetuning by sculpting and/or remodelling

o   Easily smooth out visible 3D printed layers and imperfections caused by blobs, zits and removed support structures

  •         Very easy to paint with acrylic paints

o   SKULPT 3D printed object only has to be degreased with soap and lukewarm  water before painting

  •         SKULPT 3D printed objects can be polished
  •         Repeatedly sculptable and reusable

o   SKULPT 3D printed objects can continuously sculpted by remodelling, carving, cutting, adding extra material SKULPT material, etc…

o   Leftover support structures can be reused for sculpting

o   Does not dry out or crack

·        Self-supporting

o   3D print support structures with the same SKULPT 3D printer filament as used for the primary objects as the object can perfectly be smoothed out and leftover support material can be reused for sculpting.

 

 

SKULPT 3D Printing Filaments

 

General printing guidelines*

 

Nozzle size: ≥ 0.4mm

Layer height: ≥ 0.2mm

Flow rate: ± 110 - 121%*

Print temp:± 190  - 220° C *

Print speed:Medium

Retraction: Yes ± 1.5 - 3mm

Heat bed: ± 45 - 60°C*

Fan speed: 100%

Experience level:Beginner

 

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) For printers that use a 2.85mm SKULPT  3D printer filament the recommended printing (nozzle) temperature range is ± 200  - 220° C (benchmarked on Ultimaker 2. For printers that use a 1.75mm SKULPT 3D printer filamentthe recommended printing (nozzle) temperature range is ± 190  - 210° C (benchmarked on Prusa I3 MK2).

*) The heated bed should be set at 60° C for 3D printing the first layer of your SKULPT 3D printed object and then lowered 45° C for 3D printing the remainder of your SKULPT 3D printed object .

*) When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 2.85mm SKULPT filament it is recommended to increase the flow rate to ± 121% (benchmarked on Ultimaker 2). When 3D printing with SKULPT 3D printer filament on a 3D printer that uses 1.75mm SKULPT filament it is recommended to increase the flow rate to ± 110% (benchmarked on Prusa I3 MK2).

3 other products in the same category: