Europe's Leading 3D-Printing Store in High Quality Builder3D-Printers and FormFutura Filaments & Pellets . All for Professionals, Artists & Hobbyists

Atlas Support™ - Natural

New product

Atlas Support is the next generation in PVA water-soluble support materials for FFF/FDM 3D printing. Atlas Support is the result of extensive research to PVA improvement which has resulted in an unique formulation where numerous PVA grades have been blended into one superior water soluble support material with improved thermal stability. 

Meer details

Eur 33,45 incl. BTW

  • 1.75mm
  • 2.85mm
  • 300 gram
  • 50 gram (Sample Coil)

Meer informatie

Atlas Support has good bonding to a wide variety of materials – such as PLA, ABS, PETG, ASA, HIPS, et cetera – and is much less sensitive to degradation by humidity.

Unique features

  • Excellent water solubility

    • Excellent support material for complex dual extrusion prints!

  • Improved thermal stability

    • Much lesser risk of clogged nozzles caused by deteriorating/crystalizing material in (too) hot nozzle

  • Good bonding to various (thermo)plastics

  • Odourless processing

  • Biodegradable once dissolved in water

General printing guidelines *

Nozzle size: ≥ 0.15mm Layer height: ≥ 0.1mm Flow rate: ± 100%
Print temp: ± 180 - 205° C * Print speed: Medium Retraction: Yes ± 5mm
Heat bed: ± 0 - 60° C Fan speed: 0-25% Experience level: Expert

*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.

*) Do not exceed a printing temperature of 225˚C, because then PVA crystallizes quickly and it will no longer flow and/or dissolve in water. Printing with PVA materials does require a certain level of 3D printing expertise as PVA cannot stay too long in the hot secondary/support nozzle and needs to flow and by that needs expert tweaking to find the optimal “waiting temperature” for the material not to deteriorate/crystalizing in the hot secondary/support nozzle when not being printed.

 

Filament length

ρ: 1.22 g/cc 50 gr coil 0.3 Kg spool
Ø 1.75mm ± 17.0m ± 102m
Ø 2.85mm ± 6.4m ± 39m

Product export information

HS Code: 39169090 Description: Monofilament Country of origin: the Netherlands

Compliance *

This filament is compliant to below listed directives and regulations.

  • RoHS directive 2011/65/EC

  • REACH directive 1907/2006/EC

*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.

Accessoires

Klanten die dit artikel kochten, bestelden ook:

Downloaden

TDS Atlas Support™

Technical Data Sheet Atlas Support™

Downloaden (80.94k)

MSDS Atlas Support™

Material Safety Data Sheet Atlas Support™

Downloaden (216.17k)