TitanX is an industrial-grade, high-performance and FFF/FDM-optimized ABS based engineering filament.
Waarschuwing: laatste items in voorraad!
Greatly improved mechanical properties and strength
High impact resistance
Much less smell compared to when printing with “normal” ABS-based filaments
Printing with remarkable fine detail
General printing guidelines *
|Nozzle size: ≥ 0.15mm||Layer height: ≥ 0.1mm||Flow rate: ± 106%|
|Print temp: ± 240 - 260° C||Print speed: Medium||Retraction: Yes ± 5mm|
|Heat bed: ± 80 - 90° C||Fan speed: 0-25%||Experience level: Beginner / Intermediate|
*) Above displayed settings are meant as guidance to find your optimal print settings. These ranges in settings should work for most printers, but please do feel free to experiment outside these ranges if you think it is suitable for your printer. There are a lot of different type of printers, hot-ends and printer offsets that it is extremely difficult to give an overall one-size-fits-all setting.
|ρ: 1.10 g/cc||50 gr coil||0.75 Kg spool||2.3 Kg spool||4.5 Kg spool||8 Kg spool|
|Ø 1.75mm||± 18.9m||± 283m||± 869m||± 1701m||± 3024m|
|Ø 2.85mm||± 7.1m||± 107m||± 328m||± 641m||± 1140m|
Product export information
|HS Code: 39169090||Description: Monofilament||Country of origin: the Netherlands|
This filament is compliant to below listed directives and regulations.
RoHS directive 2011/65/EC
REACH directive 1907/2006/EC
*) This declaration of conformity to directives and regulations is prepared according to our present standard of knowledge and may be amended if new cognitions are available and applies only for the above described products.